Products Description
FG-1450Z46 automatic folder gluer machine used for corrugated cartons
Machine structure: paper feeder + alignment + pre-folder (46 corner system) + lock bottom + folding/output +6 meters conveyor
Components list
|
No. |
Name |
Brand |
Origin |
|
1 |
Feeding belt |
NITTA |
Japan |
|
2 |
Folding belt |
NITTA |
Japan |
|
3 |
V-poly belt |
Harkin |
France |
|
4 |
Bearing |
NSK or C&U |
Japan or China |
|
5 |
Air cylinder |
Yisaiya |
China |
|
6 |
Main motor |
Dedong |
China |
|
7 |
Motor in conveyor |
Zhongda |
China |
|
8 |
Reducer motor |
Zhongda |
China |
|
9 |
Touch screen |
Flexem |
China |
|
10 |
PLC |
LS |
Korea |
|
11 |
Inverter |
Innovance |
China |
|
12 |
Vibrating motor |
Hengyuan |
China |
|
13 |
Emergency stop |
Schneider |
France |
|
14 |
Sensor |
Fotek |
Taiwan |
|
15 |
Switch power |
MW |
Taiwan |
|
16 |
|||
|
17 |
Attention：when the purchased parts in the machine are upgraded, updated, or replaced by better brand, seller will remain without additional notice.
Technical Parameter
| Max paper size： |
1450*1000mm |
| Min paper size： | 300*150mm |
| Paper weight： | 200-800gsm paper board, E, B corrugated |
| Suitable for： | straight line, flat-mouth cartons |
| Total power： |
23KW |
| Power supply： | 380V, 50HZ, 3-phase |
| Air source： | 0.7m³/min |
| Machine weight： | about 13500KGS |
| Machine size: |
15600*2400*2100mm |
The machine has：
FEEDER
- Equipped with vibrating motor
- With independent transmission, low noise, with front adjustable wheels, max working capacity can be achieved.
- Feeding knives and left and right registers fixing bar are controlled up and down by pneumatic system easily. Feeding knifes are equipped with pneumatic mechanism for smoother feeding.
ALIGNMENT
In this section, we have another structure for option: creasing wheels, especially used for corrugated boxes which do not have good die cutting.
Pre-fold section (4/6 corner system)
- Big-size pre-break assembly is provided.
- 4/6 corner system is optional
- The middle top carrier can be lifted up.
- 3-carriers
Lock bottom section (Optional))
Lock bottom assembly mechanism with high elastic hookers is of ideal design, fast and easy operation.
Modular-design lock-bottom section reduces the box change-overtime, enhances the installing and changing time for the parts.
Lock-bottom section of modular design reduces the adjusting time for different boxes, and enhances the change-over time for installing attached parts.
LOWER GLUING TANK
- Big-volume design, when the machine is running at high seed, the glue will not go out or leaking. Optional bottle is good for long time operation
FOLDING SECTION
- Equipped with speed variator for belts, ensure the folded boxes parallel and in good order.
- Fast, convenient adjustment and operation can fold boxes perfectly.
- The middle up and down transmission module can fold the boxes synchronously or alternately.
TRANSFER SECTION
- Pressure can be adjusted according to paper thickness. For flute A,B corrugated board, overlapping and jogger devices are equipped to ensure box gluing well. After kicker is set up, whatever speed the machine runs, the kicker can automatically to follow, no need to reset it.
CONVEYOR
- Pneumatic pressure increasing, speed and pressure can be independently adjusted, pressure could be a bit increased on boxes, so the finished boxes will be more beautiful.
- The front section of conveyor can be coordinated with overlapping and jogger devices to move up and down suitably.
- Jogger device is optional
